Handheld Automatic Screwdrivers
Our automatic fastening inline screwdriver systems are available in several different configurations and flexible counterbore tip designs
Our automatic screw feeding, pistol grip screwdriver systems are available in several different configurations, with PLC controller and ergonomic design.
Our DTI 5000 Rigid Automatic screwdriving systems are designed to hold the fastener securely in the barrel and collet assembly to increase productivity.
This Counterbore design is tubular shaped that guides the fastener down the barrel tip into a counter sunk hole or recessed part. The length of the counterbore tip is determined by the depth of the fastener location.
Design Tool, Inc. builds our Screw Feeders to adapt to any DC electric screwdriver. The torque angle-control with monitoring controls the fastening process for product quality assurance and has reporting options.
The T-Handle Deck Screwdriver is designed to drive screws or bolts into decking or flooring for trailers in the truck and bus industry. The system is used in the upright position driving fasteners automatically while minimizing fatigue or strain on back or joints.
Our automatic pin nailer systems replace existing nail gun components with our exclusive designs to insure the nails are driven to the correct depth.
Our Single or Multifeed Feeding Systems are available using aluminum, nylon coated, or stainless steel bowls. Most sizes come in 10 inch, 18 inch, or 24 inch diameter bowls. All systems have the automation shut off feature that reduces wear and saves energy.
The DTI 400 Linear Workarm is always recommended for positioning the screwdriver over the screw location and driving the screw straight down vertically. The workarm comes with 24” or 36” reach with balancer and has a height of 36” inches.